Disclaimer: The technical statements, information and recommendations contained herein are believed to be accurate as of the date hereof, but Mingledorff’s does not make representations or warranties, express or implied, as to its accuracy, its completeness, or the results to be obtained. The information is being provided for informational purposes only and is intended for use by persons having adequate skill and expertise regarding the proper selection, use and application of the products and recommendations and at their own risk and discretion.
ICP Furnace Showing 80% Limit Fault
Most gas furnaces have several safety limits, main limits, roll-outs, 80%’s will have a DSS (Daft Safety Switch) These safety
Indoor TXV Failure in Heat Mode
This article is in reference to Residential Heat Pumps. Everyone in the HVAC industry knows that the indoor TXV
Compressors Problems & Troubleshooting
Compressors are the heart of the refrigeration system. It creates the pressure difference to move the refrigerant through the system.
R-454B & R-410A Refrigerants: Are They The Same?
You have probably gone to classes, listened to podcast or read articles about the phase out of R-410A, and the
Speedy Maintenance: Split Heat Pump Fall Check Sheet
Today’s article is a guideline to help new technicians develop a speedy routine while doing fall maintenance on heat pumps.
Why am I getting a 25 Fault Code?
When a Bryant furnace displays Error Code 25, it indicates that the control board has detected a configuration mismatch between